A factory assembled, pressure tested, rotary single metal bellows cartridge seal. This seal can handle a wide spectrum of applications from cryogenic to high temps. Bellows is self cleaning due to its rotation and is balanced for high pressures.
NUTECH 10 MECHANICAL SEAL
Features and Benefits
EASY TO INSTALL - No measuring is required to install the NUTECH 10 cartridge seal.
NO SHAFT OR SLEEVE WEAR - There are no dynamic O'Rings on the shaft or sleeve to cause the fretting to equipment.
ALIGNMENT BALANCE SHIFT - The balance automatically adjusts providing lower balance for low pressures that results in longer life, and high balance for high pressures that provides consistent low leakage performance.
PRESSURE TESTED - All NUTECH 10 seals are completely pressure tested at the factory to assure no inherent problems at the pump site.
3 WAY CLIPS - A new design clip not only centers the seal but stops axial movement in both directions.
